Mini RF Booster Drop Amplifier With 20dB Gain

1000Mhz CATV Antenna Booster Drop Amplifier With 20dB Gain
This mini RF amplifier compensates the signal loss resulting from the long coax cable run or the splitter to make your cable TV system, indoor TV antenna or FM antenna signal with solid and clear quality.

This mini cable TV signal amplifier makes cable TV, UHF/VHF TV system or FM radio with flat 20 dB boost. So no more poor reception, snowy picture or pixelation seen on TV screen ! 

It is recommended for use in households with less than 15 TVs chained up together in order to provide optimal distribution and amplification of your RF signals.

Easily extend the cable TV signal for another 1000FT or 300m if RF TV source signals have fair 70 to 75dB strength to start with.

Great signal booster for applications in:

• Analog and Digital CATV System
• Aerial antenna for DTV broadcast
• Resort and Hotel & Building MATV System
• CCTV surveillance channels
• FM radio system

It is built with integrated transformer and fuse inside the amplifier. 

High Gain 20dB Boost
This unit is featured with 20 dB boost for RF input signals to compensate the RF TV signal loss and attenuation after long cable transmission.

Users can easily extend the cable TV signal for another 1000FT or 300m if RF TV source signals have fair 70 to 75dB strength to start with.

So more TVs can be added in office building or residence home with more splitters or longer cable used.

Wide Operation Frequency Range
This RF signal amplifier has a wide operation frequency range from 10 MHz to 1000MHz.

It can provide continuous amplification on all digital/analog cable TV signals, over-the-air digital TV signals, analog UHF/VHF signal and FM radio signals.

Double As Drop Amplifier
This unit can be used as a drop amplifier and it has AC power transformer built in already, much better in operation efficiency than those passive non-powered type drop filters.

Super Low Noise Figure
Noise figure is a measurement of the amount of noise being generated by the amplifier.

This CATV amplifier provides an industry-leading low noise amplification. Its noise figure is only 1.5 dB, which essentially means there is no noticeable impact on the cable signal.

Super Low Flatness
The RF coax TV booster is also noted for having an exceptionally low flatness rating of 1.5 dB, resulting in a stable signal quality across all channels..

Mini Size With Internal Fuse Built In
The enclosure of this mini TV signal amplifier is housed in a lightweight enclosure for superior corrosion protection and designed for indoor use.

It also have an internal fuse built in for extra safety and protection against power surge through the power line, very suitable for installation in apartments, hotels, dormitories, etc.

• Provide low-noise amplification of RF signals for stable signal quality and optimal distribution across all TV channels. 
• Optimize your TV signal strength with 20dB more powerful.
• One-way indoor type RF signal amplifier for analog CATV channels, digital CATV system, resort/hotel/public MATV system, CCTV surveillance channels or FM antenna signals.
• Provides continuous coverage on all cable TV frequencies, over-the-air UHF/VHF TV frequencies or FM frequencies.
• Great solution for compensating the TV signal loss caused by splitters and long cable runs.
• Extend the cable TV signal for another 1000FT or 300m if RF TV source signals have fair 70 to 75dB strength to start with.
• Wide operation frequency range from 10 MHz to 1000MHz.  
• Double as drop amplifier with active power supply.
• Recommended for use in households with less than 15 TVs chained up together.
• Reduce digital TV pixelation and graininess due to low signal levels.
• Super low noise figure of 1.5 dB with low distortion.
• Mini compact size with low power consumption.
• It also has an internal fuse built in for extra safety and protection against power surge through the power line.
• Very suitable for installation in apartments, hotels, dormitories, etc.

• Operation Frequency Range: 10-1000MHZ
• Input Level: ≦ 8   dBmV
• Output Level: ≦ 28 dBmV
• Power Gain: 20 dB +/- 1.5 dB
• Noise Figure: <= 1.5 dB
• Gain Flatness: +/- 1.5 dB
• Input Return Loss (45~860MHz): >= 8 dB
• Output Return Loss (45~860MHz): >= 8 dB
• AC Power: 110V(60Hz) with US 2-Prong plug
• Size: 35mm(H) x 74mm(W) x 48mm(D)