Professional 16-Channel CATV RF Combiner 1U Rack-Mountable
Product Description
Item will be restocked on Jan 8, 2025
Professional 16-Way CATV RF Combiner 1U Rack-Mountable
This CATV combiner is a top-grade RF CATV signal combiner designed fro private cable networks employing multiple modulators and processing equipment.
It can combine 16 RF TV source signals into one coax cable run with no external power supply needed for the operation.
This RF CATV combiner could also be used in a reverse way as RF TV splitter when combined with use of a RF amplifier.
Built with high isolation so its output can be transmitted in stable quality with no noise or interference incurred.
Ideal for all CATV, MATV, surveillance CCTV and antenna TV coaxial operations.
 |
 |
16 In 1 Out RF CATV Combiner
This unit is a top-grade RF CATV
combiner with no power supply needed. It can combine up to 16 RF TV source signals into one coax cable run.
 |
Wide Frequency Range Support
This unit supports a broad frequency range from 5 to 1000MHz. Most of the RF TV signals
such as cable TV or antenna TV signals can be handled by this unit.
 |
High Isolation
This CATV combiner provides high Port-To-Port isolation between RF TV signals so the combining will have no potential of channel interaction
Each adjacent TV channel can be transmitted in stable quality with no noise or interference incurred.
1U Rack Mountable
This CATV combiner is built in 19" 1U size and rack mount ready for setup with other headend rack systems.
-20 dB Test Port
A front-panel -20 dB test port (75-ohm "F" type connector) allows testing of the unit's output without interrupting the
service and easy for troubleshooting.
 |
- Professional quality 16-way RF CATV combiner designed fro private cable TV networks employing multiple RF modulators and processors.
- Combines up to 16 RF TV source signals into one coax cable run with no external power supply needed for the operation.
- Ideal for CATV, surveillance CCTV aerial TV and antenna TV coaxial operations.
- This RF CATV combiner could also be used in a reverse way as RF TV splitter when combined with use of a RF amplifier.
- Built with high isolation so its RF output can be transmitted in stable quality with no noise or interference incurred.
- A -20 dB test port on the front panel allows testing of the unit's output without interrupting the service.
- Supports broad frequency range of 5 to 1000MHz.
- Port-To-Port isolation ensures combining without the potential of channel interaction.
- RFI shielding for minimized egress/ingress interference.
- Die cast housing for absolute minimal insertion losses.
- 19" 1U size and rack mount ready for setup with other head-end rack systems.
- RF Output: Coax F-Type Female x 1
- RF Inputs: Coax F-Type Female x 16
- RF Frequency Range: 5~1000MHz
- Insertion Loss: <= 21dB (Typical)
- Isolation: 30dB (Typical)
-
Test Point: -20dB
