Composite RCA Video Audio Over RG6 RG59 Coax Cable Extender Kit Max 2000 Feet
Product Description
Composite RCA Video Audio Over RG6 RG59 Coax Cable Extender Kit Max 2000 Feet
Now you can easily extend your analog video/audio feeds from DVD player or CCTV surveillance camera through the coax cable to a TV, video monitor or DVR at
long distance.
This video audio over coax cable extender kit allows long distance transmission of standard video and audio signals traveling through RJ6 or RG59 coaxial cable while maintaining crisp and clear picture and sonic quality all the way till the receiving ends.
Coax type RG6 and RG59 cable can be used to carry multiple video/audio or radio/antenna signals with various frequency ranges in same cabling such as the cable TV distribution.
With help of this video audio over coax cable extender kit, users can also combine and transmit multiple surveillance camera video feeds through just one coax cable in real time with no lags.
The maximum transmission distance can be up to 800 meters or 2000 feet with excellent video quality with good isolation for avoiding interference from other devices.
This video audio extender kit save labor time and reduce the cost of buying and installing more cables.
 |
This video audio extender kit is very suitable for public broadcasting applications in classroom, conference rooms or video surveillance for hospitals, airports, restaurants, hotels, conference rooms as well as in secure military and commercial setup.
 |
Easy Installation
This video/audio over coax cable extender kit contains a local transmitter and a remote receiver module.
Simply connect the video and audio output from devices such as CCTV camera, DVD player, Digital TV converter to the coax transmitter unit first, which will modulate both the audio video source signal into a selectable TV channel frequency based upon the choice of the installer and also connect the receiver with TV, monitor, DVR or other type of AV receiving device.
Then run the coax cable between TX(transmitter) and RX(receiver) unit and tune both TX and RX to the same TV channel number.
Coax cable receiver will revert the coax TV channel signal back to separate composite video audio format for connection with monitor display or recording by DVR.
 |
Cost Efficient Solution For Distance Signal
Transmission
Coaxial cables offer a low-cost solution for long distance signal transmission line. Coaxial
cable is widely popular and already wired in many households, corporate buildings and campus due
to the aerial, CATV/MATV, satellite installation or closed-circuit television (CCTV)
for surveillance and distance education.
Coax cable can be used to carry multiple video/audio, radio/antenna signals or other signals together with various frequency ranges in same cabling such as the cable TV distribution.
With help of this coax cable extender kit, users can easily combine multiple surveillance cameras to be linked together through one single coax cable for transmission far over 800 meters (2000ft) without losing picture and sonic quality.
 |
RCA Video Audio Distribution Over Coax
This video audio over coax cable extender kit can be widely deployed in various applications such as:
Save labor time and reduce the cost of buying and installing more cables through using this video audio extender kit.
 |
One Transmitter For Multiple Coax Receivers
One coax cable transmitter can work with multiple coax receivers at the same
time.
Additional coax receivers can be purchased separately for large setup.
 |
Adjustable Video
Audio Control
Both the A/V to coax transmitter
and the coax to A/V receiver modules are featured with adjustable controls for
audio/video signal and gain adjustment. Users can manually adjust the
signal input/output level for easy integration with existing cable system. So the
picture stability will remain the same as the original A/V input signal for the
remote end display with minimum distortion and noise-free with full brightness
and contrast.
Last Channel Memory
The coax transmitter and receiver unit will retain the setting after being
powered off manually or power outage event.
Easy Expansion
Multiple units can be cascaded together at any time. Users can add additional
transmitter and receiver units in the setup for accommodating more audio/video
source devices without adding new cables since the signal
can be cascaded from the transmitter though multiple receivers.
- Best video audio over coax RG6 RG59 cable extender for long range media signal transmission with maximum distance.
- Save labor time and reduce the cost of buying and installing more cables.
- Maximum transmission distance over 800 meters (2000ft) in real without losing picture and sonic quality.
- Fully plug and play. Easy to install and small in size.
- Adjustable signal gain and equalization control to ensure that the full resolution of the computer video output be retained the same at the remote end display with full brightness and contrast.
- One coax transmitter can work with multiple coax receivers at the same time. Additional coax receivers can be purchased separately for large setup.
- Multiple transmitter and receiver units can be cascaded for accommodating more A/V source signals and building up a large scale broadcast TV system for home use or commercial use.
- Supports RCA L/R stereo audio transmission over long coax cable run with the same crystal clear sonic quality retained all the way to the end.
- Supreme 100db output for driving multi-channel media information sufficiently over the long cable runs.
- Last channel memory. The kit will retain user's setting after power-off.
- Suitable for public broadcasting applications in classroom, conference rooms or video surveillance for hospitals, airports, restaurants, hotels, conference rooms as well as in secure military and commercial setup.
- Coax Transmitter:
- Channel Display: Digital LED Screen
- TV Channel Frequency Range: CH1 to CH106 (48.25 MHz to 860.75 MHz)
- Noise Level: 10db (max)
- RF Input Connector: F-Type female x 1
- Video Output Connector: RCA-Type x 1
- Audio Output Connectors: RCA-Type x 2
- Channel/Volume Operation: By IR remote control or push buttons on the front panel
- Video/Audio Gain Control: Manual adjustment knobs on the front panel
- Power Supply: AC 110/220V with DC 12V 500mA, Center Positive
- Coax Receiver:
- RF Output Strength: 100 +/- 5dB
- TV Channel Frequency Range:
- CATV: CH1(48.25MHz) - CH108(798.25MHz)
- UHF/VHF: CH21(471.25MHz) - CH69(885.25MHz)
- RF Modulation Type: Double side band
- RF Signal Output Level: 100+/-5 dbuv
- Video Input Connectors: Composite RCA female x 1
- Audio Input Connectors: RCA female x 2 for audio L/R)
- Output Connector: Coax F-Type female x1
- Video/Audio Gain Control:
- RF lever
- Video/Audio deviation
- Video/Audio carrier
- Video/Audio modulation
- Power Supply: AC 110/220V with DC 12V 500mA, Center Positive
- Dimension: 2.95"(W) x 4.5"(D) x 1.2"(H)
- Transmitter unit x 1
- Receiver unit x 1
- DC 12V power adapters x 2
- User manual and installation sheet
